New Transformer Oil Treatment Units
Transformer Filtration Systems offers a wide range of solutions for insulation oil and transformer oil treatment to ensure our clients are supplied with an effective fluid treatment.
Vokes Stream-Line Mobile C4000 Cartridge Filter Units
Click Here to enquire about a New Unit
Why Filter With Our VOKES Insulating Fluid Treatment Systems?
Insulating Fluid is vitally important for the safe and efficient operation of many types of electrical equipment. In addition to its insulating properties, the fluid is used as a coolant in transformers and as a means of arc suppression in circuit breakers. In each case the operation of the electrical equipment depends on the purity of the insulating fluid, which in services can be contaminated by particles, water, gases and chemical products.
Should electrical equipment be continuously operated with contaminated fluid, its efficiency will be impaired, resulting eventually in the risk of total failure. Typically insulating fluid is contaminated in the following ways:
- Particles including fibres, rust and colloidal carbon.
- Free and dissolved water.
- Gases produced by fluid ageing, equipment failure and arc suppression in switchgear.
- Chemical products caused by oxidation, as well as cross contamination by other products.
Although individually each contaminant reduces the insulating characteristics of the fluid by around 20%, the combination of fibres from insulating material and water can reduce its performance by up to 90%.
Insulating fluid treatment maintains the integrity of the fluid and hence the efficient utilisation of the electrical equipment.
Contaminants in Insulating Oil
WATER
Enters During Transportation, Oil Temperature Change, Produced During Oxidation of Oil & Paper
FIBRES
During Transportation From Cleaning Cloths From Paper Insulation
CARBON
Produced During Arcing in Switchgear Produced During Tapchanger Operation
Major Particle Distribution Size, 0.5 – 15 Micron Requires Ultra Fine Filtration for Removal
GASES
Produced by Heat, Corona, Sparking, Arcing
Overheating: Ethylene
Corona: Hydrogen
Arcing: Acetylene
Used for Fault Analysis
RUST, OXIDE
During Transportation
Dirty Drums
From Steel Pipes
From Corrosion Inside Transformers
ACIDITY
Formed by Unstable Oil, Oxygen, Iron or Copper
Organic Acids Create Sludge
Promote Degradation of The Paper Insulation
Oxidation Forms More Water
SLUDGE
Produced in Oils Having a High Acidity Level
Organic Acids duce Sludge
Formed by Unstable Oil, Oxygen, Iron or Copper
Deposited in Layers Within The Transformer
Our Transformer oil treatment plants provide a tried and tested solution for the dehydration and treatment of insulating oil. In many cases, treatment with a Vokes Stream-Line plant will result in an oil of a higher specification than when originally supplied as new.
Vokes Stream-Line Transformer oil treatment plants are used around the world by major electrical utilities, end users, service companies and transformer builders.
Our plants offer high performance, reliability and ease of use. Treatment with our plants will;
- Reduce total water content from 50ppm to less than 5ppm in a single pass, and to less than 3ppm in three passes.
- Remove virtually all suspended solids greater than 1 micron.
- Reduce dissolved gas content from 10% by volume to less than 0.25% by volume in a single pass, and to less than 0.1% by volume in three passes.
Vokes Stream-Line transformer oil treatment plants are available using either disposable high efficiency microglass filter cartridges, or the edge type filter packs which can be cleaned by backflushing with compressed air for repeated reuse.
Transformer Filtration Systems have the experience and expertise to provide tailor made solutions specifically designed to suit your business needs.
Insulating Oil Treatment Plant Range Overview
Micro Glass Disposable Filter Cartridges
Model | Capacity (litre/hour) |
Heating Power (kW) |
Pumps (kW) |
Total Power (kW) |
415V Load (Amp) |
Length (mm) |
Width (mm) |
Height (mm) |
Weight (kg) |
|
C6000 | 6,000 | 100 | 10 | 110 | 160 | 3,200 | 1,500 | 1,800 | 1,800 | |
C4000 | 4,000 | 75 | 8.5 | 83.5 | 120 | 2,600 | 1,500 | 1,800 | 1,200 | |
C2000 | 2,000 | 50 | 5 | 55 | 80 | 2,000 | 1,500 | 1,800 | 900 |
Edge Filtration–Reusable Filter
Model | Capacity (litre/hour) |
Heating Power (kW) |
Pumps (kW) |
Total Power (kW) |
415V Load (Amp) |
Length (mm) |
Width (mm) |
Height (mm) |
Weight (kg) |
|
SL4000 | 4,000 | 100 | 10 | 110 | 160 | 3,000 | 1,500 | 1,800 | 1,650 | |
SL2000 | 2,000 | 50 | 6 | 56 | 80 | 2,100 | 1,300 | 1,600 | 1,100 | |
SL1000 | 1,000 | 25 | 4 | 29 | 42 | 1,700 | 1,300 | 1,600 | 1,050 | |
SL0500 | 500 | 12.5 | 2.5 | 15 | 22 | 1,400 | 1,000 | 1,600 | 600 | |
FM0500 | 500 | N/A | 240V | 1450 | 1000 | 1650 | 260 |
NB. Dimensions and Weights are estimated and are for FIXED plants WITHOUT CANOPYs; weights are DRY. Weights and dimensions will vary when optional extras are added and should be used as a guide only.
Click Here to enquire about a New Unit
Plants are available in a range of sizes and configurations, with treatment capacities from 500 to 6000 litre/hour treatment capacity, as either fixed, semi‑mobile or fully mobile, towable plants.
Our UK VOKES factory trained team can configure your plant to suit your specific applications.